RC MODEL STORE The Fastest growing name in Radio Control
RC MODEL STORE The Fastest growing name in Radio Control
The MGB8346HV is a programmable waterproof ultra high speed and torque brushless digital servo, part of MacGregor's range of high voltage servos designed for General use in RC Aeroplanes, Cars & Helicopters.
MacGregor's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack. This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (8.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.
Dead band: | 2µs |
---|---|
Working frequency: | 1520µs / 330hz |
Motor: | Brushless Motor |
Gearset: | Steel |
Spline: | 25T |
Operating Voltage: | 5.0 ~ 8.4V |
Operating Speed (5.0V): | 0.17sec/60° |
Operating Speed (6.0V): | 0.14sec/60° |
Operating Speed (7.4V): | 0.11sec/60° |
Operating Speed (8.4V): | 0.10sec/60° |
Stall Torque (5.0V): | 22.6kg.cm |
Stall Torque (6.0V): | 27.1kg.cm |
Stall Torque (7.4V): | 33.5kg.cm |
Stall Torque (8.4V): | 38.0kg.cm |
Dimensions: | 40.6 x 21 x 37.6mm |
Weight: | 83.7g |
Connector Wire Length: | JR 300mm |
Bearing: | 2BB |
No customer reviews for the moment.