RC MODEL STORE The Fastest growing name in Radio Control
RC MODEL STORE The Fastest growing name in Radio Control
The MG7232HV is part of MacGregor's new range of high voltage digital servos. This high voltage, high torque servo has been designed for use with large scale & aerobatic aircraft.
MacGregor's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack. This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (8.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.
Dead band: | 1µs |
---|---|
Working frequency: | 1520µs / 330hz |
Motor: | Coreless Motor |
Operating Speed (6.0V): | 0.12sec/60° |
Operating Speed (8.4V): | 0.09sec/60° |
Stall Torque (6.0V): | 26.2kg.cm (363.83oz/in) |
Stall Torque (8.4V): | 31.5kg.cm (437.43oz/in) |
Dimensions: | 40.5 x 20.5 x 36mm /1.59 x 0.80 x 1.43in |
Weight: | 72g (2.54oz) |
Connector Wire Length: | JR 265mm (10.43in) |
Bearing: | 2BB |
No customer reviews for the moment.