PREDATOR 3.2m COMPOSITE JET (KIT ONLY)

Features:

• Full composite construction, lightweight and strong
• Two piece wing and two piece stabiliser all for easy transport
• Three piece fuselage. Rear section easily removable for transport
• Painted outside the mold so no seam lines
• Pre-installed tubes for servo extension leads

Description

A whole new line of sport jet, designed from the ground up with performance in mind. With the 3.2 version taking the already great flying Predator, and making it bigger and a whole lot better, needs to be flown to be believed!

Select one of the several aggressive colour schemes and really stand out from the crowd at your next event.

Setting:

Aileron: 36mm, Rudder: 40mm, Elevator: 33 mm. Flap: 55mm for take off and 120mm for landing.

The CG is 430mm from the front leading edge on the root of the wing

Specifications

Included Hardware

• Complete air frame (including aluminium wing-tubes and fibreglass control horns)
• Servo extension leads and MPX Multi-wire servo/electric retracts/brake plugs. Just one connection per wing.
• Dual wall tail pipe (105mm diameter - for 80-300N turbines)
• 3 in 1 Kevlar tank. 7.800ml fuel tank, 2.400ml smoke tank and 500ml UAT
• Fuel tubing pre-prepared, fuel dot and breather valve
• Pre-prepared pushrods with ball links
• Smoke pump and injection tube

Required Hardware

Turbine: 200-300N for normal sport flying

Servos: TBC

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

Video