FMS 980MM P-40B FLYING TIGER ARTF W/REFLEX

The Curtiss P-40 Warhawk was an American single-engined, single-seat, all-metal fighter and ground-attack aircraft that first flew in 1938. The P-40 design was a modification of the previous Curtiss P-36 Hawk which reduced development time and enabled a rapid entry into production and operational service. The Warhawk was used by most Allied powers during World War II, and remained in frontline service until the end of the war. It was the third most-produced American fighter, after the P-51 and P-47; by November 1944, when production of the P-40 ceased, 13,738 had been built.

The Flying Tigers consisted of three fighter squadrons with about 30 aircraft each. It trained in Burma before the American entry into World War II with the mission of defending China against Japanese forces. The group of volunteers were officially members of the Chinese Air Force.

The Tigers' shark-faced fighters remain among themost recognizable of any individual combat aircraft and combat unit of World War II, and they demonstrated innovative tactical victories when the news in the U.S. was filled with little more than stories of defeat at the hands of the Japanese forces.

The group first saw combat on 20 December 1941, 12 days after Pearl Harbor. It achieved notable success during the lowest period of the war for U.S. and Allied Forces, giving hope to Americans that they would eventually succeed against the Japanese. They are officially credited with 296 enemy aircraft destroyed.

The 2nd of FMS's mighty 980mm series aircraft has arrived! The P-40B is, like the 980mm P47,is definitely a head turner! If you love warbirds and enjoy the excitement of heart-pounding speeds,this aircraft will satisfy both of your desires! The stock 3 bladed props, 3648 brushless outrunner, 4 cell battery and 70A ESC means that the P- 40B can attain speeds of up to 100mph+. Be ready to turn heads with the awesome 980mm P-40B!

Features

• Modular motor board allows use of both standard and high speed motor configurations
• Powerful Brushless 3648-KV770 motor combined with heavy-duty 70A ESC.
• Metal gear servos on the ailerons, elevator and rudder for maximum durability
• Super scale appearance including hand painted pilot, detailed cockpit, authentic graphics, three bladed prop, wing stabilizers, and air scoop.
• Simple construction with minimal glue required for assembly
• Rugged electronic retractable landing gear with metal trunnions
• Durable EPO foam with reinforced one-piece wing
• Ball link connectors are used replacing the traditional clevis

Specifications

Wingspan: 980mm / 38.6in
Length: 865mm / 34in
Flying Weight: 1,200g
CG (Center of Gravity): 50-55 mm back from the leading edge of wing at wing root
Power System: Brushless 3648-770Kv (installed)
Battery Connector: XT-60
Electronic Speed Control: 70A with 5A SBEC (installed) with EC5 Battery Connector
Propeller / EDF: 10.5 x 7 3-Blade
Servos: 9g digital metal gear Servo x 4 (ailerons, elevator, rudder), 9g digital nylon gear servo X2 (flaps) - all pre-installed

Required To Complete

• Transmitter
• Receiver
• Battery and Charger
• AA Batteries

For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org