Bucks Wing Joining / Small Repair Kit

The kit contains Laminating Epoxy Resin and Hardener 150ml, Glass Fibre Reinforcing Tape 100mm (4”) Wide / One Metre Long, one resin spreader card, two mixing pots, two spatulas and a full set of instructions for joining a wing on model aeroplanes and gliders.

This kit is very useful for repairs to model Boats, Planes and Glider mouldings. Once the resin and hardener is mixed then put into a tray (larger area) to prevent heat build up, this will give you a longer pot life / working time (50 minutes). The cure time is 24 hours at room temp.

The Resin and Hardener is also Foam Friendly.